“To inhibit / control green and other algae / bacteria / fungi is the main purposeof using OLKLIN-AC-3.” These troublesome microbiological growths can cause number of problems such as plugging of pipelines and equipments, reduced cooling capacity, corrosion etc. These problems can be nullified by our product OLKLIN-AC-3, which is broad-spectrum algaecide / biocide, effective over a broad pH range and can be used along with other water treatment chemicals.
It contains nature friendly and powerful quats, low foaming surfactants and corrosion inhibitors, which are known for its effectiveness on the microbes.
Depending on the algal growth OLKLIN-AC-3 should be applied continuously to the system for three days to destroy existing algae. (If Algal growth is much, it is better to remove the growth manually before treatment for better result. After that our system engineer will recommend the optimum weekly dose. Generally we recommended 50 to 100 ppm.
Store the product in a cool and dry place away from direct sunlight.
The product is available in 50 to 200 kg HDPE carboys.
Before handling the product, refer material safety data sheet which contains detailed information about this product (available on request).