Algaecide / Bactericide / Mill Sanitation Chemical

OLKLIN®-AC-5

Algaecide / Bactericide / Mill Sanitation Chemical

INTRODUCTION:

“To inhibit / control green and other algae / bacteria / fungi is the main purpose of using OLKLIN –AC-5.” These troublesome microbiological growths can cause number of problems such as plugging of pipelines and equipments, reduced cooling capacity, corrosion etc. These problems can be nullified by our product OLKLIN-AC-5, which is broad-spectrum algaecide / biocide, effective over a broad pH range and can be used along with other water treatment chemicals.

CONTENTS OF OLKLIN-AC-5:

It contains 1,5-pentanedial as an active ingredient and other non-hazardous, non-foaming additives and salts thereof as a supplemental additives.

ADVANTAGES OF USING OLKLIN-AC-5:

•    Effectively controls algae formation.
•    Prevents slipperiness.
•   Prevents development of bad fouling odour.
•   Inhibits chloramines formation.
•   Inhibits hazardous bacterial growth.
•   Improves cooling tower capacity, cooling capacity.
•   controls the growth of bacteria, fungi and algae, including sulfate reducing bacteria
•   broad spectrum having the ability to penetrate and remove bio-film
•   readily biodegradable in the environment
•   effective at alkaline pHs

DIRECTION FOR USE:

Depending on the algal growth OLKLIN-AC-5 should be applied continuously to the system for three days to destroy existing algae. (If Algal growth is much, it is better to remove the growth manually before treatment for better result. After that our system engineer will recommend the optimum weekly dose.

STORAGE:

Store the product in a cool and dry place away from direct sunlight.

PACKING:

The product is available in 25 to 200 kg HDPE carboys.

SAFETY PRECAUTIONS:

Before handling the product, refer material safety data sheet which contains detailed information about this product (available on request).