OLKLIN®-DSC-1
Cleaner For Heat Exchanger Systems
Introduction:
“To clean scale and algal deposits from condenser and other heat exchanger systems, piping system, power plant equipments etc is the main purpose of using OLKLIN-DSC-1”. All the small and large-scale industries faces number of water caused scaling problems, affecting adversely to heat transfer, product quality, reaction time, and men-power waste which are self-realized.
Contents:
The product contains suitable blend of powerful cleaning agents and specially designed corrosion inhibitors.
Properties:
| Property | OLKLIN-DSC-1 |
|---|---|
| State | Liquid |
| pH | <2 |
| Density | 1.13 +/- 0.03 |
| Color | Milky to dull yellow |
| Odor | Very little irritating |
(These are typical values and not the final specifications)
Advantages:
- Increases system capacity to its extreme level in terms of heat transfer and water circulation by removing narrowing/chalking of coils / pipes.
- Prevents breakages, leakages of the joints / coils / pipes and thereby prevents accident hazard.
- Prevents non-scheduled and unwanted shutdown of your plant and so improves profitability.
Direction for Use:
OLKLIN-DSC-1 is a liquid formulation and its dose depends on severity of chalking and other operating parameters. Our technical experts will suggest optimum dosage after detailed study.
Storage:
Store the product in a cool and dry place away from direct sunlight.
Packing:
The product is available in 230 kg HDPE carboys.
Safety precautions:
Before handling the product, refer material safety data sheet which contains detailed information about this product (available on request).