Oxygen Scavenger

OLKLIN®-OSLH+

Oxygen Scavenger

INTRODUCTION:

OLKLIN-OSLH+ is an oxygen scavenger used for boiler water treatment applications to nullify corrosive effect due to oxygen. It is highly effective as Oxygen scavenger and corrosion Inhibitor and can be applied and works best in place of hydrazine based products. The product OLKLIN-OSLH+ giving a passivation effect also can be used in all boiler water systems (except where FDA compliance is required).

Properties of OLKLIN-OSLH+ :

Property	OLKLIN-OSLH+
State	Liquid
pH (1%)	8.2±0.2
Density	1.02 ± 0.02
Color	Water white to pale yellow
Odor	Almost odorless
Viscosity	3 cps @ 15°C
Solubility in Water	Soluble in all proportions

*Properties mentioned and color shown in the photo above is for general idea of the product.

ADVANTAGE:

OLKLIN-OSLH+ is very widely used in industrial boiler water treatment as oxygen scavenger and corrosion inhibitor. It can be used in boilers of any pressure, up to and including supercritical (220 barg). It has no dissolved solids in it and so works best minimizing TDS levels and blow downs. The product do not generate ammonia as hydrazine based product does. This product reacts fast also and it is not hazardous just like hydrazine.

SAFETY AND HANDLING:

OLKLIN-OSLH+ is generally safe (if proper handling instructions are followed) but avoid contact with eyes and prolonged contact with skin. Do not take internally. In case of contact with skin, wash with plenty of water. In case of contact with eyes, flush with water and get prompt medical attention. Gloves and goggles should be used while handling the product. (Refer MSDS before handling the product)

STORAGE:

OLKLIN-OSLH+ is non-flammable, non-combustible. It should be stored under shade. The product should not be exposed to direct sunlight.

PACKING:

OLKLIN-OSLH+ is available in 50Kg Carboy / 200Kg Polydrums