OLKLIN-OSLH is an oxygen scavenger used for boiler water treatment applications to nullify corrosive effect due to oxygen. It is highly effective as Oxygen scavenger and corrosion Inhibitor and can be applied and works best in place of other conventional products. The product OLKLIN-OSLH giving a passivation effect also can be used in all boiler water systems (except where FDA compliance is required).
Property | OLKLIN-OSLH |
---|---|
State | Liquid |
pH as is | 12.0 |
Density | 1.01 ± 0.02 |
Color | Water white to pale yellow |
Odor | Slight ammonical |
Viscosity | 3 cps @ 15°C |
Solubility in Water | Soluble in all proportions |
*Properties mentioned and color shown in the photo above is for general idea of the product.
OLKLIN-OSLH is very widely used in industrial boiler water treatment as oxygen scavenger and corrosion inhibitor. It can be used in boilers of any pressure, up to and including supercritical (220 barg). It has no dissolved solids in it and so works best minimizing TDS levels and blow downs.
OLKLIN-OSLH is generally safe (if proper handling instructions are followed) but avoid contact with eyes and prolonged contact with skin. Do not take internally. In case of contact with skin, wash with plenty of water. In case of contact with eyes, flush with water and get prompt medical attention. Gloves and goggles should be used while handling the product. (Refer MSDS before handling the product)
OLKLIN-OSLH is non-flammable, non-combustible. It should be stored under shade. The product should not be exposed to direct sunlight.
OLKLIN-OSLH is available in 50Kg Carboy / 200Kg Polydrums