Rust Inhibitor For Aqueous Systems Suitable For All Industrial Machinery & Power Plant – OLKLIN-CIQUA-924

OLKLIN®-CIQUA-924

Rust Inhibitor for Aqueous Systems suitable for all Industrial Machinery & Power Plant

Introduction:

When water comes in contact with systems, corrosion of the metal, during and after contact, is a concern. OLKLIN-CIQUA-924 when added to water in small concentrations are able to prevent corrosion during wet storage. The corrosion inhibitor prevents corrosion even after vacating water from the system.

The mechanism of OLKLIN-CIQUA-924 corrosion inhibitor is to prevent corrosion of metals in three phases: within the solution, at the water line, and above the water line. It also prevents corrosion in the areas which are not reachable with other corrosion inhibitors.

Contents:

The product is a combination of corrosion inhibitors, alkalinity builders, passivator, surface modifiers, chelating agents, oxygen scavenger and capable to protect various metals from corrosion even in the presence of relatively high concentrations of Chloride and Sulfate ions. The product is suitable to reach every corner of the part / system that requires protection from severe corrosive atmosphere.

*Properties mentioned and color shown in the photo above is for general idea of the product. Actual product property may vary.

Features and benefits of using OLKLIN-CIQUA-924:

• No heavy metals.
• Provides up to 24 months of continuous protection.
• Provides mono-molecular inhibiting layer (protection layer).

Additional benefits:

• The product provides vapour-phase inhibiting action which protects inaccessible and recessed surfaces.
• No regeneration required; effective for up to 24 months.
• If the protective layer is disturbed by moisture or opening of the enclosed space, the layer is replenished by continuous vapour protection.
• Little or no surface preparation required and easy to apply.
• Prevents further corrosion of the pre-coated and painted surfaces.
• The protection layer does not need to be removed prior to processing or use.
• The protection layer does not interfere with operation of mechanical components.

Application and additional applications:

Suitable for all Industrial machineries & Power plant.

Additionally the product is very suitable for the following:

• Hydro-testing.
• Long term storage of water.
• Tubular structures, pipes and vessels.
• Internal surfaces of compressors, turbines, engines, tanks, boilers, heat exchangers.
• Closed circuit cooling systems.
• Equipment protection after hydrostatic testing.

Metals protected:

Carbon steels, Mild steels, Stainless steels, Copper, Brass, Aluminium.

Direction for use:

The product dose depends on quality of water and corrosive tendency of atmosphere also in some cases. But in general 10 to 1000 ppm is sufficient. More particularly, the dose may be 300- 500 ppm. The product may be dosed by a slug feed or by blending with the aqueous fluid as the system is being filled. One can dose the material continuously using metering pump also.

The pH of the aqueous system in which the product may be applied ranges from about 5 to about 12. The pH is preferably in the range from about 6 to about 10.

The dosage can be increased for more severe conditions.

Storage:

Store in a sealed container in a dry warehouse, avoiding direct exposure to sunlight, with temperatures not exceeding 150°F (66°C). Under these conditions, shelf life is up to 24 months.

Packing:

The product is available in 50 to 200kg HDPE carboys.

Safety precautions:

Before handling the product, refer material safety data sheet which contains detailed information about this product (available on request).