OLKLIN-SCL-1
SLUDGE CONDITIONER-LIQUID
HIGH MOLECULAR WEIGHT ANIONIC POLYMER
Multi-polymer containing acrylamide and acrylate.
| TYPICAL PROPERTIES | VALUE |
|---|---|
| Appearance | Water white to pale yellow liquid |
| pH (10% solution) | 4.0 ± 0.5 |
| Solid content | 40.0 ± 2.0 |
| Stability of the deionised water solution (in days) | 10 |
| Stability of the dry product (in months) @ 25°C | 12 |
APPLICATION
Uses:
This product is used in the following liquid-solid separation processes:
- Mechanical dewatering – treating inorganic sludge for increased throughput, solids recovery, and effluent quality.
- Gravity settling – improves the formation of flocs for faster settling rates, increased sludge compaction, and improved water quality.
- Coagulant aid – settling aid with inorganic and organic coagulants.
- Filtration – improves filtered water quality and plant throughput.
- Water clarification – improves influent, process and effluent water quality by reducing suspended solids and turbidity.
- Phosphate removal in waste water treatment.
The above are some of the primary applications for this product. It may be beneficial in any liquid-solid separation process.
USAGE METHODOLOGY:
Stock solutions can be prepared up to 0.5% concentration via an automated make down unit or on a batch basis.
In laboratories, the stock solution can be prepared of 0.5% which will remain stable for 8-10 days but a use concentration of 0.1% solution must be used up in 1-4 days.
Solutions should be aged 30-60 minutes to achieve maximum effectiveness. High quality make up water should be used.
Secondary dilution water should be added to the stock solution prior to the addition point at a ratio of at least 10:1. Avoid using centrifugal pumps to transfer the polymer.
ADVANTAGES:
- Economical to use – effective at low dosage levels.
- Performs well over a wide pH range, it does not alter the system pH.
- Eliminates or reduces the use of inorganic salts.
- Fast settling rates.
- Achieves high solids removal efficiencies.
- Easily soluble in water.
- Dry product minimizes storage equipment.
STORAGE AND HANDLING
Flocculants are hygroscopic. Store in dry place at a temperature below 35°C.
Spillages should be cleaned up rapidly; surfaces will become very slippery if wetted.
STANDARD PACKAGING:
55kg polyethylene carboys/220 kg polyethylene drums.
The information given herein is believed to be reliable. However, no guarantee is made or liability assumed. Manhar Specialities does not know of all of the uses to which its products may be utilized or the condition of use. Therefore, Manhar Specialities makes no warranty concerning the fitness or suitability of the product for a particular use or purpose.