skip to Main Content
Demulsifier

OLKLIN®-VES-900

VISCOELASTIC SURFACTANT

WELL STIMULATION ADDITIVE-ENHANCE OIL RECOVERY

Introduction:

OLKLIN-VES-900 is a chemical diverting agent used in carbonate matrix acidizing. Proper acid placement / diversion is required to make matrix acid treatment successful. Diversion is needed also because of permeability contrasts and lithological differences in the reservoir. For a number of years, viscoelastic surfactant (VES) fluids have been used for a variety of stimulation treatment applications, including hydraulic fracturing, acid diverting, and gravel packing. VES fluid systems typically offer higher-retained permeability and conductivity of the formation sand and proppant pack than polymeric systems.

Contents:

It is the product comprising of suitable surfactant(s) and stabilizer blended with required solvent.

Property OLKLIN-VES-900
State Transparent liquid
Density 0.99
Color Pale yellow to yellow
Solubility Fresh and salt water
Flash Point 85/29° F/C
Pour Point -10/-23° F/C
Viscoelastic Surfactant - OLKLIN-VES-900 is capable of being used in both fresh and salt water environments..
Viscoelastic Surfactant - OLKLIN-VES-900 can be used without the addition of solids.

*Properties mentioned and color shown here are for general idea of the product. Actual product property may vary depending on crude oil characteristics / field trials.

Application benefits:

  • Substantially improves product performance and cost effectiveness.
  • Extended temperature range to 300°F by using VES stabilizer technology.
  • The system works with high-density brines up to 14.4 ppg.
  • Solids free, having good viscosity and proppant transport capability.
  • Do not damaging to the subterranean formation.
  • Capable of being used in both fresh and salt water environments.
  • Can be used without the addition of solids.
  • Internal breakers have been developed that permit a controlled viscosity break from ambient to 300°F.
  • Can be left in the formation after fracturing to be broken by insitu water and oil, without fear of damage to the formation.

Handling:

Refer the Material Safety Data Sheet before handling.

Storage:

Store in Cool & Dry place away from direct sunlight.

Packing:

200kg HDPE barrels.

Back To Top